Jeti-EX-Protokoll
Jeti-EX-Protokoll can be used to:
- Format how to display telemetry data at the DC-16
- Telemetry voice output
- Announcement of error messages and mode switch messages
- Acoustical variometer
- Logging of the telemetry data
Jeti-EX-Protokoll only works with FlightControl V2.1 or higher
Firmware Version
Currentl I'm using V 3.00. Current Version is 3.02
Updating is easy and does not require an appliation.
- Connect Jeti DC-16 to PC or MAC
- Power on Jeti DC-16 and start USB (DC-16 asks fo it)
- After 10-20 seconds the filesytem is mounted and you can access it
- Backup folder "models" which contains all the configured models
- For updating copy the new V 3.00 files to the DC-16 filesystem
- Restart the Jeti DC-16. The DC-16 display guides you trough the update
Install MK Jeti-EX-Protokoll extensions
The Mikrokopter Wiki has a good tutorial and all required files to use Jeti-EX-Protokoll.
Jeti-EX-Protokoll Hardware
Jeti-EX-Protokoll only works with FlightControl V2.1 or higher
Jeti-EX-Protokoll config problem
I was neither able to enable "VARIO-altitude" nor "display telemetry ads" with already existing models using modelltype "Truck&Boat"
I solved this problem by using this JETI model file (*.jsn) from the Mikrokopter Wiki. Just copy this file to the folder "/Model" on the DC-16.
Voice Files
I used these english files from the Mikrokopter Wiki. My dc-16 uses language "german". Therefore I copied the english files to the "/de/" sub-folders.
